Shop fox W1835 Specifications

OWNER'S MANUAL(FOR MODELS MANUFACTURED SINCE 12/12)MODEL W1835 TRACK SAWPhone: (360) 734-3482 • Online Technical Support: [email protected]

-8-Model W1835 (For Machines Mfg. Since 12/12)SAFETYSAFETYDISCONNECT POWER FIRST. Always disconnect tool from power supply BEFORE making adjustments,

-9-Model W1835 (For Machines Mfg. Since 12/12)SAFETYWEARING PROPER APPAREL. Do not wear clothing, apparel or jewelry that can become entangled in movi

-10-Model W1835 (For Machines Mfg. Since 12/12)SAFETYAdditional Safety for Track SawsREAD and understand this entire manual before using this machine.

-11-Model W1835 (For Machines Mfg. Since 12/12)SAFETYUnderstanding KickbackPreventing KickbackKickback is a sudden and unexpected expulsion of the saw

-12-Model W1835 (For Machines Mfg. Since 12/12)ELECTRICALELECTRICALCircuit RequirementsCircuit Requirements for 120VThis machine is prewired to operat

-13-Model W1835 (For Machines Mfg. Since 12/12)ELECTRICALPolarized Plug5-15 Receptacle1-15 PlugNeutralHotFigure 3. NEMA 1-15 plug & receptacle.For

-14-Model W1835 (For Machines Mfg. Since 12/12)SETUPKeep tool disconnected from power until instructed otherwise.This tool has been carefully packaged

-15-Model W1835 (For Machines Mfg. Since 12/12)SETUPRecommended CFM at Dust Port: ... 100 CFMDo not confuse this CFM recommendation with

-16-Model W1835 (For Machines Mfg. Since 12/12)OPERATIONSOPERATIONSThis tool will perform many types of operations that are beyond the scope of this m

-17-Model W1835 (For Machines Mfg. Since 12/12)OPERATIONSChanging BladesSevere lacerations, amputation, or death can occur if blade changing/adjustmen

This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, r

-18-Model W1835 (For Machines Mfg. Since 12/12)OPERATIONSRiving Knife AdjustmentThe riving knife must be properly aligned with the blade and positione

-19-Model W1835 (For Machines Mfg. Since 12/12)OPERATIONSCutting depth should always be set at just past the bottom of the workpiece. The best way to

-20-Model W1835 (For Machines Mfg. Since 12/12)OPERATIONSThere are generally two types of cuts made with this saw—straight cuts and plunge cuts. Strai

-21-Model W1835 (For Machines Mfg. Since 12/12)OPERATIONSPlunge cuts are made by positioning the saw on the workpiece so that the blade begins cutting

-22-Model W1835 (For Machines Mfg. Since 12/12)OPERATIONSLet the saw reach full speed before contacting the workpiece. Doing so will reduce the risk o

-23-Model W1835 (For Machines Mfg. Since 12/12)OPERATIONSAdditional rail tracks (sold separately) can be joined with the rail track connector. To conn

-24-Model W1835 (For Machines Mfg. Since 12/12)MAINTENANCEMAINTENANCEAll rotating parts within the saw are pre-lubricated and shielded, and do not nee

-25-Model W1835 (For Machines Mfg. Since 12/12)SERVICESERVICETroubleshootingThis section covers the most common problems and corrections with this typ

-26-Model W1835 (For Machines Mfg. Since 12/12)SERVICEThe zero-stop set screw (see Figure 27) keeps the saw resting at exactly 90°. It can be adjuste

-27-Model W1835 (For Machines Mfg. Since 12/12)PARTS12345678910111111111213141515151617181920212223242526272728293031333435373738394040414243444546474

SET UPELECTRICAL MAINTENANCESERVICE PARTSOPERATIONSSAFETYINTRODUCTIONUSE THE QUICK GUIDE PAGE LABELS TO SEARCH OUT INFORMATION FAST!INTRODUCTION ...

-28-Model W1835 (For Machines Mfg. Since 12/12)PARTSTrack Saw Parts ListREF PART # DESCRIPTION REF PART # DESCRIPTION1 X1835001 POWER CORD 18G 2W 72&q

-29-Model W1835 (For Machines Mfg. Since 12/12)PARTSD4362 Rail Track & D4363 Accessory Pack Parts Breakdown12234410110210310410510556REF PART # DE

-30-Model W1835 (For Machines Mfg. Since 12/12)PARTS

Model W1835 (For Machines Mfg. Since 12/12)

TAPE ALONG EDGES--PLEASE DO NOT STAPLEFOLD ALONG DOTTED LINEFOLD ALONG DOTTED LINEWoodstock international inc. p.o. box 2309 bellingham, Wa 98227-2309

WARRANTYWoodstock International, Inc. warrants all Shop Fox machinery to be free of defects from workmanship and materials for a period of two years f

High Quality Machines and ToolsWoodstock International, Inc. carries thousands of products designed to meet the needs of today's woodworkers and

USE THE QUICK GUIDE PAGE LABELS TO SEARCH OUT INFORMATION FAST!SET UP ELECTRICALMAINTENANCESERVICEPARTSOPERATIONS SAFETYWoodstock Technical SupportINT

-3-Model W1835 (For Machines Mfg. Since 12/12)INTRODUC TIONGlossary of TermsThe following is a list of common definitions, terms and phrases used thro

-4-Model W1835 (For Machines Mfg. Since 12/12)INTRODUC TIONProduct Dimensions:Weight ...

-5-Model W1835 (For Machines Mfg. Since 12/12)INTRODUC TIONOther Specifications:Country of Origin ...

-6-Model W1835 (For Machines Mfg. Since 12/12)INTRODUC TIONControls and FeaturesA. Primary Handle: Used to steady the saw when plunging and to advanc

-7-Model W1835 (For Machines Mfg. Since 12/12)INTRODUC TIONI. Dust Collection Port: 1 1⁄2" port for connection to a dust collection system or sh